evomax the fastest mil-dtl-38999 series iii filter connector innovative interconnection solutions data
evomax the fastest mil-dtl-38999 series iii filter connector features and benefits ?reduced leadtime ?lower unit cost ?no tooling / nre charges (subject to specific filter requirements) ?faster service on quotation, envelope drawing, product specification and capabilities ?can accommodate new deutsch evoport termination technology ?metal or composite shell materials ?transient protection options available (consult deutsch for more details). all of this is achieved without compromising flexibility in terms of filter configuration and performance. the deutsch evomax range is the next evolution of the mil-dtl-38999 series iii filter connector. deutsch have reviewed 20 years of experience in working on customer-specific applications to identify all the bespoke product features that have been utilised. we have then categorised product specification the evomax connector generally meets the requirements of mil-dtl-38999 series iii. however, some deviations from this standard are necessary due to the inclusion of filtering and other specific requirements, which are defined on the next page. these and produced a standardised connector design that can accommodate all of the key options. by undertaking much of the design work upfront, and producing generic assembly tooling and jigs, we are able to pass a number of benefits onto the customer. 2 data
base connector specification: - square flange style connectors: mil-dtl-38999/20 - jam nut style connectors: mil-dtl-38999/24 insulation resistance: typ 5g minimum - subject to capacitance capacitor dielectric material: x7r or equivalent capacitor tolerance: ?0% filtering / electrical footprint: as detailed on product configuration sheet contact type: non-removable contacts ground path resistance to shell: 15m typ operating temperature range: -55? to +125? other deviations from the mil spec are as defined by configuration sheet and drawing. connectors are supplied in protective packaging. please advise us of any special requirements. ?product envelope drawing - a generic envelope drawing will be supplied with the quotation for each connector. ?configuration sheet - the completed configuration sheet defines the specific requirements of the connector and is the controlling document. ?declaration of design and performance (ddp) - a comprehensive ddp will be supplied upon request. this details the environmental performance levels that are applicable to the evomax . every evomax connector is released from deutsch against the following documentation: 3
square flange with mounting slots square flange mounting with additional rear flange 09 11 13 15 17 19 21 23 25 2.50 (0.098) 3.18 (0.125) or 5.0 (0.197) 3.20 (0.126) 2.50 (0.098) 3.18 (0.125) or 5.0 (0.197) shell 'a' sq 'b' sq 'c' sq 'd' 'e' 'f' max 'g' dia 'h' dia 'j' sq 'k' dia 'l' sq 'm' 'n' rad 'p' dia 'r' pcb tail size max (min) rear max ?.50mm mounting (?.020) 24.10 18.26 15.09 5.49 3.25 2.50 3.25 16.66 16.70 15.67 14.00 8.00 9.00 12.39 15.50 (0.949) (0.719) (0.594) (0.216) (0.128) (0.098) (0.128) (0.656) (0.657) (0.617) (0.551) (0.315) (0.354) (0.488) (0.610) 26.50 20.62 18.26 4.93 3.25 2.50 3.25 20.22 19.40 15.67 14.00 8.00 9.00 12.39 15.50 (1.043) (0.812) (0.719) (0.194) (0.128) (0.098) (0.128) (0.796) (0.764) (0.617) (0.551) (0.315) (0.354) (0.488) (0.610) 28.90 23.01 20.62 4.93 3.25 2.50 3.25 23.42 21.80 18.85 17.00 8.00 12.00 15.47 18.65 (1.138) (0.906) (0.812) (0.194) (0.128) (0.098) (0.128) (0.922) (0.858) (0.742) (0.669) (0.315) (0.472) (0.609) (0.734) 31.30 24.61 23.01 4.93 3.25 2.50 3.25 26.59 23.80 22.22 19.00 12.00 18.00 18.77 22.00 (1.232) (0.969) (0.906) (0.194) (0.128) (0.098) (0.128) (1.047) (0.937) (0.875) (0.748) (0.472) (0.709) (0.739) (0.866) 32.60 26.97 24.61 4.93 3.25 2.50 3.25 30.96 25.80 25.45 22.00 12.00 20.00 21.94 25.25 (1.283) (1.062) (0.969) (0.194) (0.128) (0.098) (0.128) (1.219) (1.016) (1.002) (0.866) (0.472) (0.787) (0.864) (0.994) 36.80 29.36 26.97 4.93 3.25 2.50 3.25 32.94 28.20 28.57 25.00 16.00 22.00 24.48 28.40 (1.449) (1.156) (1.062) (0.194) (0.128) (0.098) (0.128) (1.297) (1.110) (1.125) (0.984) (0.630) (0.866) (0.964) (1.118) 40.00 31.75 29.36 4.93 3.25 3.20 3.25 36.92 30.60 31.75 27.00 16.00 22.00 27.63 31.55 (1.575) (1.250) (1.156) (0.194) (0.128) (0.126) (0.128) (1.454) (1.205) (1.250) (1.063) (0.630) (0.866) (1.088) (1.242) 43.20 34.93 31.75 6.15 3.91 3.20 3.91 39.29 33.30 34.72 29.00 16.00 22.00 30.81 34.50 (1.701) (1.375) (1.250) (0.242) (0.154) (0.126) (0.154) (1.547) (1.311) (1.367) (1.142) (0.630) (0.866) (1.213) (1.358) 46.30 38.10 34.93 6.15 3.91 3.20 3.91 42.47 36.50 37.50 31.00 16.00 24.00 33.88 37.30 (1.823) (1.500) (1.375) (0.242) (0.154) (0.126) (0.154) (1.672) (1.437) (1.476) (1.220) (0.630) (0.945) (1.334) (1.469) 09 11 13 15 17 19 21 23 25 shell 'a' sq 'b' sq 'c' sq 'd' 'e' 'f' max 'g' dia 'h' dia 'h' dia 'j' sq 'k' dia pcb tail solder bucket size max (min) rear (min) front max ?.50mm 0.80mm mounting mounting (?.020) (?.031) 24.10 18.26 15.09 5.49 3.25 2.50 3.25 16.66 15.88 16.70 15.67 (0.949) (0.719) (0.594) (0.216) (0.128) (0.098) (0.128) (0.656) (0.625) (0.657) (0.617) 26.50 20.62 18.26 4.93 3.25 2.50 3.25 20.22 15.88 19.40 15.67 (1.043) (0.812) (0.719) (0.194) (0.128) (0.098) (0.128) (0.796) (0.625) (0.764) (0.617) 28.90 23.01 20.62 4.93 3.25 2.50 3.25 23.42 19.05 21.80 18.85 (1.138) (0.906) (0.812) (0.194) (0.128) (0.098) (0.128) (0.922) (0.750) (0.858) (0.742) 31.30 24.61 23.01 4.93 3.25 2.50 3.25 26.59 23.01 23.80 22.22 (1.232) (0.969) (0.906) (0.194) (0.128) (0.098) (0.128) (1.047) (0.906) (0.937) (0.875) 32.60 26.97 24.61 4.93 3.25 2.50 3.25 30.96 25.81 25.80 25.45 (1.283) (1.062) (0.969) (0.194) (0.128) (0.098) (0.128) (1.219) (1.016) (1.016) (1.002) 36.80 29.36 26.97 4.93 3.25 2.50 3.25 32.94 28.98 28.20 28.57 (1.449) (1.156) (1.062) (0.194) (0.128) (0.098) (0.128) (1.297) (1.141) (1.110) (1.125) 40.00 31.75 29.36 4.93 3.25 3.20 3.25 36.92 32.16 30.60 31.75 (1.575) (1.250) (1.156) (0.194) (0.128) (0.126) (0.128) (1.454) (1.266) (1.205) (1.250) 43.20 34.93 31.75 6.15 3.91 3.20 3.91 39.29 34.93 33.30 34.72 (1.701) (1.375) (1.250) (0.242) (0.154) (0.126) (0.154) (1.547) (1.375) (1.311) (1.367) 46.30 38.10 34.93 6.15 3.91 3.20 3.91 42.47 37.69 36.50 37.50 (1.823) (1.500) (1.375) (0.242) (0.154) (0.126) (0.154) (1.672) (1.484) (1.437) (1.476) 4
jam nut jam nut connectors are available with a conductive or non-conductive 'o' ring. please specify your requirements in the additional notes section, on the tear off product configurator sheet, at the back of this datasheet. full drawings for all variants of evomax connectors are available to download from www.deutsch.net/filters 09 11 13 15 17 19 21 23 25 shell 'a' a/f 'b' a/f 'b' dia 'd' 'e' 'f' dia pcb tail solder size max max max +0.00 +0.25 max ?.50mm bucket -0.25 (+0.010) ( 0.020) ?.80mm (-0.010) -0.00 ( 0.031) 27.20 24.00 30.40 17.02 17.78 15.67 (1.071) (0.945) (1.197) (0.670) (0.700) (0.617) 32.00 27.00 35.10 19.59 20.96 15.67 (1.260) (1.063) (1.382) (0.771) (0.825) (0.617) 35.10 32.00 38.30 24.26 25.65 18.85 (1.382) (1.260) (1.508) (0.955) (1.010) (0.742) 38.30 36.00 41.50 27.56 28.83 22.22 (1.508) (1.417) (1.634) (1.085) (1.135) (0.875) 41.50 37.00 44.70 30.73 32.01 25.45 (1.634) (1.457) (1.760) (1.210) (1.260) (1.002) 46.20 41.00 49.40 33.91 35.18 28.57 (1.819) (1.614) (1.945) (1.335) (1.385) (1.125) 49.40 46.00 52.60 37.08 38.35 31.75 (1.945) (1.811) (2.071) (1.460) (1.510) (1.250) 52.60 50.00 55.80 40.26 41.53 34.72 (2.071) (1.969) (2.197) (1.585) (1.635) (1.367) 55.80 51.23 58.90 43.43 44.70 37.50 (2.197) (2.017) (2.319) (1.710) (1.760) (1.476) 2.50 (0.098) 3.18 (0.125) or 5.0 (0.197) 3.20 (0.126) 5 evomax part numbers evo 19-35 p n **** deutsch filter connector series evo - evomax product designator shell size and insert arrangement see list of arrangements on product configurator sheet contact type p - pin s - socket polarisation n, a, b, c, d, e specific mod number assigned by deutsch to define filter values, and all other connector details solder bucket i/d rear termination dimensions contact size solder bucket i/d (min) pcb tail dia max 22 0.90 (0.035) 0.56 (0.022) 20 1.06 (0.042) 0.81 (0.032) 16 1.75 (0.069) 1.02 (0.040) dimensions are in mm (inches)
please use one sheet per connector. mark your selection with an ?? ensuring that at least one box is checked under each sub-category. some configurations may not be available - deutsch will advise by return should an option be selected which cannot be provided. please fax the completed form to +44 (0) 1424 851726 or save a copy and email to salesuk@deutsch.net deutsch will release this connector against the controlled documents listed below at the latest issue. page 1 of 2 for deutsch use only: document no. / deutsch part no. . . . . . . . . . . . . . . . . . . . . . . . . issue . . . . . . . . . . . . . . . date . . . . . . . . . . . . . . . . . . . . . . deutsch ddp number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . issue . . . . . . . . . . . . . . . dat e . . . . . . . . . . . . . . . . . . . . . . deutsch envelope drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . issue . . . . . . . . . . . . . . . date . . . . . . . . . . . . . . . . . . . . . . filter topology (specify transient protection on additional sheet) tick all that apply if mixed filtering is required on the connector, please identify the requirements below, or on the next page. your reference for this connector shell mounting style square flange with mounting slots square flange with m3 threaded inserts square flange with 4-40unc threaded inserts jam nut optional pcb mounting feature none additional rear flange with wash out slots and m3 helicoils additional rear flange with wash out slots and 4-40unc helicoils evoport ready - m3 helicoils evoport ready - 4-40unc helicoils rear termination 2.5mm (0.098? pc tails 3.18mm (0.125? pc tails 5.0mm (0.197? pc tails 3.20mm (0.126? solder buckets evoport ready pins rear termination finish (leave blank for evoport ready pins) clean (tails or buckets) tin dipped (pc tails) shell material / finish aluminium alloy / cadmium with olive drab finish aluminium alloy / electroless nickel stainless steel / passivated composite / cadmium with olive drab finish composite / electroless nickel interface pins sockets orientation / keyway nab cde insert arrangement / planform ?deutsch product configurator sheet maximum working voltage ac / dc tick all that apply 50vdc 100vdc 200vdc 500vdc 1000vdc other (please specify) 50vac 100vac 200vac 500vac 1000ac 125vdc 250vdc 500vdc 750vdc 1000vdc 1500vdc other (please specify) 125vac 250vac 500vac 750vac 1000vac 1500vac filter value (total capacitance per contact) tick all that apply if mixed filter values, grounded or feedthrough lines or varistor devices are required, please identify the requirements for each contact below, or on the next page. dielectric withstand voltage tick all that apply ? ?l ?c ?i 0.5nf 1nf 2.5nf 5nf 10nf other (please specify) 15nf 20nf grounded feedthrough (unfiltered) 6 additional notes: 09-98 (3#20) 09-35 (6#22) 11-02 (2#16) 11-05 (5#20) 11-98 (6#20) 11-35 (13#22) 13-04 (4#16) 13-98 (10#20) 13-35 (22#22) 15-05 (5#16) 15-18 (18#20) 15-19 (19#20) 15-35 (37#22) 15-97 (4#16, 8#20) 17-06 (6#12) 17-08 (8#16) 17-26 (26#20) 17-35 (55#22) 17-99 (2#16, 21#20) 19-11 (11#16) 19-32 (32#20) 19-35 (66#22) 21-11 (11#12) 21-16 (16#16) 21-41 (41#20) 21-35 (79#22) 21-39 (2#16, 37#20) 23-21 (21#16) 23-55 (55#20) 23-35 (100#22) 25-19 (19#12) 25-29 (29#16) 25-61 (61#20) 25-35 (128#22) 25-24 (12#12, 12#16) 25-04 (8#16, 48#20)
1 (a) 2 (b) 3 (c) 4 (d) 5 (e) 6 (f) 7 (g) 8 (h) 9 (i) 10 (j) 11 (k) 12 (l) 13 (m) 14 (n) 15 (o) 16 (p) 17 (q) 18 (r) 19 (s) 20 (t) 21 (u) 22 (v) 23 (w) 24 (x) 25 (y) 26 (z) 27 (a) 28 (b) 29 (c) 30 (d) 31 (e) 32 (f) 33 (g) 34 (h) 35 (i) 36 (j) 37 (k) 38 (l) 39 (m) 40 (n) 41 (o) 42 (p) 43 (q) deutsch will release this connector against the controlled documents listed below at the latest issue. page 2 of 2 for deutsch use only: document no. / deutsch part no. . . . . . . . . . . . . . . . . . . . . . . . . issue . . . . . . . . . . . . . . . date . . . . . . . . . . . . . . . . . . . . . . deutsch ddp number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . issue . . . . . . . . . . . . . . . dat e . . . . . . . . . . . . . . . . . . . . . . deutsch envelope drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . issue . . . . . . . . . . . . . . . date . . . . . . . . . . . . . . . . . . . . . . specific requirements per contact 7 ?deutsch contact filter value, reference (s) topology, etc contact filter value, reference (s) topology, etc contact filter value, reference (s) topology, etc your reference for this connector if necessary, please indicate your individual pin filter requirements against the relevant contact number (or letter) below. for details of available filter values, consult deutsch "standard filter values" datasheet. 44 (r) 45 (s) 46 (t) 47 (u) 48 (v) 49 (w) 50 (x) 51 (y) 52 (z) 53 (aa) 54 (bb) 55 (cc) 56 (dd) 57 (ee) 58 (ff) 59 (gg) 60 (hh) 61 (ii) 62 (jj) 63 (kk) 64 (ll) 65 (mm) 66 (nn) 67 (oo) 68 (pp) 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
for your nearest sales office visit www.deutsch.net for more information, technical assistance or custom solutions: email filters@deutsch.net www.deutsch.net deutsch?2010. information contained within this brochure is subject to change without prior notification. literature code evomax 01/10
|
